Coldstream | CA003 Countertop Water Filtration System, Stainless Steel
Coldstream | CA003 Countertop Water Filtration System, Stainless Steel
Coldstream Filter
The Coldstream Filter is a water filtration and purification system that can be connected to your tap. It provides a very strong reduction of nitrate and fluoride in the water. This system allows you to filter water directly from the tap. A built-in bypass valve allows you to filter only cold water from your tap. Not suitable for hot water.
Please note: Initial fitting F22x100, delivered with an adapter to M24x100. Please check the compatibility of your tap before purchasing or provide another adapter.
The Kit Contains
- Self-supporting frame made of high-quality 304 stainless steel, fits perfectly with your sink.
- Stainless steel fitting and white plastic connecting tube that attaches to a standard tap.
- M24x100 adapter.
- CTO+ filter.
- Compatible with Max and Sentry filters.
Specifications
The system is approximately 33cm high with a footprint diameter of approximately 7.5cm. Coldstream’s under-counter ceramic water filtration systems are convenient and discreet. They are also easy to take with you to your second home or holiday destination.
Features
The Coldstream CTO+ water purifier provides protection against water contaminants and includes everything you need to get safe, healthy and great tasting water straight from your tap. Coldstream systems are some of the most affordable on the market, yet offer the best performance, as proven by our tests and independent third-party testing.
Taps, filter housing and brackets are all made from high quality stainless steel. The kit comes with all the necessary components - mounting brackets, pipework, valves and fittings, for simple and easy installation to a 15mm water pipe.
Filter Lifetime
The Coldstream Max filter life is 3000 litres or 6 months, at a cost of 1 cent per litre.
Benefits of the Coldstream filter
- For tasty and safe drinking water
- Healthy minerals and electrolytes remain in the filtered water
- Protection against water pollution
- No power supply required
- Average filter life of 6 months
- Filters are washable
Testing and Verification
Coldstream has been successfully tested to the following standards and methods:
- NSF/ANSI 42: Aesthetic Effects
- NSF/ANSI 53: Health Effects
- NSF P231: Microbial Purifier
- US EPA Method 200.8: Determination of Metals and Trace Elements in Water and Wastes
- US EPA Method 505-2.1: Analysis of Organic Pesticides and Commercial PCBs in Water
- US EPA Method 508.1-2: Chlorine Pesticides, Herbicides, and Organohalogen Compounds in Water by GCECD
- US EPA Method 515-2: Chloric Acids
- US EPA Method 524-2: Determination of Volatile Organic Compounds in Water
- US EPA Method 525-2: Organic Compounds in Drinking Water
- US EPA Method MS301(a): An indicator strip based colorimetric test for nitrates (NO3) in water and soil.
Testing is performed according to NSF/ANSI 42, 53 and P231 standards by Envirotek Inc, New Jersey, USA, EPA ID # NJ01298 NJ. Their laboratory complies with all procedures and requirements for laboratory certification and quality control as set forth in NJAC 7:18; Part 55-2 of the NYCRR, the National Environmental Laboratory Accreditation Conference (NELAC) standards and the ISO 17025 standard.
The filters have been tested using a Coldstream system to NSF/ANSI 42, 53 and P231 standards for the reduction of listed substances. The reduction of the concentration of substances in water has been reduced to a value equal to or less than the limit for water leaving the system as specified in NSF/ANSI 42, 53 and P231 standards.
To ensure that our Coldstream products meet high and consistent standards, Coldstream has implemented a series of stringent quality control procedures. Finished filters are regularly tested to determine pore size, flow, bubble point and compression resistance, confirming that every batch will perform perfectly.