Aquaticstream CarbonFlow Black Filters (4 pieces) | NSF/ANSI 42 certified
Pickup currently not available
At a glance
4 pieces
Up to 16,000 liters
Up to 12 months
Up to 13 L/hour with 2 filters
Activated coconut carbon block filters
Compatible gravity systems
CarbonFlow Black Filters — Activated carbon & silver
The CarbonFlow Black Filters are certified by NSF International (US) according to the NSF/ANSI 42 standard. The test with red Berkey food coloring yields a remarkable result: the red water comes out of the system clear and colorless after passing through the filters.
Black Filters is compatible with gravity filtration systems from Berkey, British Berkefeld, Weeplow, Phoenix and ProOne.
What does it filter out?
The coconut shell activated carbon block is designed for an effective reduction of:
- Organic compounds
- Residual chlorine
- Radioactive substances
- Pesticides and herbicides
- Volatile organic compounds (VOCs)
- Heavy metals, including lead, mercury and cadmium
- Unpleasant odors and tastes
- Bacteria and microorganisms
- Suspended particles
- Industrial chemicals
The filter also has a decolorizing and odor-reducing effect. The activated carbon block is impregnated with silver, which helps to limit the growth of unwanted microorganisms.
Specifications
Dimensions: 250 mm ± 0.5 mm
Activated carbon source: Coconut shell
Ash content: ≤ 5%
End cap material: Polyethylene
Seal material: Silicone
End cap outside diameter: 60 mm
Outlet diameter: 5 mm
Specific surface area: ≥ 900 m²/g
Iodine adsorption value: ≥ 1,000 mg/g
Filtration accuracy: 1–3 µm
Operating temperature: 0 °C to 55 °C
Filtration performance
| Black Filters NSF/ANSI 42 feature | Value |
|---|---|
| Weight per filter | 600 g |
| Dimensions | H 250 mm |
| Flow rate with 2 filters | up to 13 L/hour |
| Filtration capacity with 2 filters | up to 16,000 liters or 12 months |
| Cost per liter | approx. 0.50 cents/L |
| Total net water capacity | ≥ 8,000 liters |
| Initial flow rate (without pressure) | ≥ 120 ml/min |
| Residual chlorine reduction (initial) | ≥ 98% |
| Solid contaminant reduction | ≥ 55% |
| Compatible with | Berkey, British Berkefeld, ProOne, Monderma, Phoenix, Weeplow |
Directions for use
- Soak the filter element completely for about 10 to 15 minutes before use.
- Do not use this filter element as a prefilter to directly capture large contaminants. This can shorten the lifespan of the filter.